I was setting up my laptop for traveling and adding Wireguard VPN configuration.
The Wireguard config generated by router only contains IPv4 address (10.0.5.x), and while testing the VPN to my surprise “what is my ip” websites can find my IPv6 address (I USB tethered mobile connection to my laptop).
It looks like NetworkManager does nothing about IPv6 connection if VPN doesn’t have IPv6 settings, which is bad for road warrior type of VPN configuration.
Is there an easy toggle to turn of IPv6 if VPN is connected and otherwise? Or is only option to disable all IPv6 no matter what?
Best to set a firewall rule with nftables to block non-vpn traffic from leaving (you should also do the save for IPv4 traffic to prevent leaks in case the tunnel disconnects)
I tried the same setup with Ubuntu 24.04.1 desktop live system and I can replicate this IP leak issue, I guess I will have to disable IPv6.
Disable in network manager?
That is what I was thinking, yes.
You could edit your configuration to change the wireguard connection’s
AllowedIPsfrom0.0.0.0/0to0.0.0.0/0,::/0so that IPv6 traffic is routed over it. Regardless of if your wireguard endpoint actually supports it, this will at least stop IPv6 traffic from leaking.Wireguard config already includes “::/0”
If you have
::/0in your AllowedIPs and v6 connections are bypassing your VPN, that is strange.What does
ip route get 2a00:1450:400f:801::200e(an IPv6 address for google) say?I haven’t used wireguard with NetworkManager, but using
wg-quickit certainly adds a default v6 route when you have::/0inAllowedIPs.
I’d also like to know, is there a way to just turn off this ipv6 trashfire? Preferably in a universal, cross-distro way?
Seems like the most universal way is: GRUB_CMDLINE_LINUX_DEFAULT=“ipv6.disable=1”
Or you could just… learn to use the modern internet that 60% of internet traffic uses? Not everyone has a dedicated IPv4 anymore, we are in the days of mobile networks and CGNAT. IPv4 exhaustion is here today.
Idk why my comment was removed. I just said most internet traffic is chinese bots which are not sentient so they’re okay with using IPv6 instead of IPv4 like people do.
IPv4 exhaustion is ofc a problem. But IPv6 discarding NAT is like throwing the baby out with the bathwater.
Huh weird that it would be removed, that’s a fair comment.
For Web scraping and other activities by so-called “legitimate” companies to varying degrees, this may be the case. But for general bots, they are generally attempting to scan and probe the entire IPv4 range, since it can be exhaustively checked in a reasonable amount of time and the majority of IPs have hosts on them. Enumerating the entire IPv6 space is quite literally impossible without some external list of hosts known to exist, due to the number of hosts. This happens, but it’s a much higher hanging fruit for an attacker so far fewer will bother. So you generally see few to no continuous probes on things like sshd over IPv6 unless you have a domain name. I’m guessing a lot of bots (in botnets) are dumb old technology that doesn’t even have IPv6.
NAT was always a hacky workaround. And although it effectively ends up functioning as a firewall under normal usage when combined with a typical “drop invalid incoming packets” rule, it was not designed to be a firewall and shouldn’t be assumed to always function as one. A simple accept established, default drop firewall rule should do the trick and should be used on both v4 and v6 regardless of NAT (and probably is on your router already).
If your goal is privacy in the sense of blending in, you can still use NATv6 and this is a good use case for it. This is what VPNs like Mullvad use. If your goal is privacy in the sense of being more difficult to track across sessions, you can enable IPv6 privacy extensions which essentially generates a new IPv6 address for every connection your device makes. So in this sense it’s more private than IPv4
Or you could just… learn to use the modern internet that 60% of internet traffic uses? Not everyone has a dedicated IPv4 anymore, we are in the days of mobile networks and CGNAT. IPv4 exhaustion is here today.
Where are you getting 60%? Google’s IPv6 Adoption page has it under 50% still:
(while other stats pages from big CDNs show even less)
Huh, I misremembered then. I stand corrected.
Notable though that there are specific countries (such as India) where adoption is far higher at 72%
Dunno why my comment was removed but I remarked that it’s either fed to them as scraps or it’s in use by scammers and bots.
Removed by mod
Removed by mod
In my case just disable IPv6 in WiFi is enough.
sysctl looks like the most universal way.
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1I keep hoping someone will come up with a half-measure that looks like ipv4 with an extra octet and writable in hex.
- Let people stew a bit on their 00c0a8011f IP which is like a 192.168.1.31 IP.
- increment the big number. Oh shit, we’ve got lots.
- repeat
- start adding the cool parts of ipv6
- moar
- add a 00 to the end that old shit just skips
- somewhere in there, switch the engine
We can either take yeeeears to do it well, or we can take more decades to try and big-bang it. This ain’t 1983.
ipv4 with an extra octet
that was proposed as “IPv4.1” on April 1, 2011: https://web.archive.org/web/20110404094446/http://packetlife.net/blog/2011/apr/1/alternative-ipv6-works/
Hmm, how about we have public facing IPv6 to gateway and then NAT to IPv4 internally. I wouldn’t have a problem with it then. In general I wouldn’t even have a problem with IPv6 or v8 or whatever even internally as long as we’ll always have NAT.
