Why does every small appliance or useful home electronics item have the BRIGHTEST LEDs in them?
I bought a new fan for our bedroom Sunday. It has 4 speed settings, and LEDs to display which setting you’re on.
Just like every other electrical device in our bedroom, I had to cover the LEDs with electrical tape because they are TOO DAMM BRIGHT. That one light was more than bright enough for me to see in the room with all the lights off.
I can’t sleep well if there’s a lot of light like that, especially blue light, and it’s like every fucking electronics manufacturer used the same extra bright blue LEDs.
All of our power strips have them. Same brightness.
The fans have them.
Don’t even get me started on digital clocks and the plague of bright LEDs that they bring about
Many charging plugs have them built into the plug itself.
Even some fucking light switches have them now!
I have about 6 different things in our bedroom that have electrical tape over their completely unnecessary LEDs.
Why has this become such a common thing? Is this really something most people want? To have a room that is never actually dark even with the lights turned off?
I get to be that guy! I’m so excited!
In power strips, the lights are (in the overwhelming majority of cases) actually a neon bulb! They’re cheaper for that specific purpose because they can be powered directly off of the mains power with a single resistor.
Your point is entirely valid and I bear the same cross, this is just a fun fact you can use to impress colleagues, strangers, and potential lovers, dazzling them with your deep esoteric knowledge of and passion for illuminators in power strips.
Hah, this is what I liked the most about reddit - learning random bits of knowledge about things I knew nothing about. I’m glad to see this happen here too!
Hell yes me too. And it was the top comment.
What’s a reddit?
It was a website from the old times of the internet, where people behind pseudonyms could freely discuss links and texts inside thematic communities.
sounds weird
Electrical tape to black it out.
Painters tape to dim it.
I literally travel with a roll of black electric tape for this exact reason.
No officer, I use it to cover the lights on electronics in my hotel room. Honest!
The electrical tape approach is what I did and it did wonders. Went from having a myriad of green and blue LEDs on my fans/portable AC/etc to complete wonderful darkness when I retired for the night. Made a distinct difference in my ability to fall asleep faster at night. I hate having lights when going to bed. Darkness or bust.
Do this and never look back
May the LED’s I tape not light the way
Car headlight are too fucking bright nowadays
People driving around like they’re trying to spot kangaroos in the suburbs
Especially when they’re in one of those God-ugly American Pickup Trucks with headlights that are right at eye level for anyone in a normal car. Even being followed by a forty year old Mack semi isn’t nearly as bad, because they’ve at least got sealed beam headlights.
“… one of those God-ugly American Pickup Trucks …”
Why’d you say American Pickup Trucks twice?
I kid, but really those things are hideous. The front end looks like a Baleen whale feeding.
Even the auto dimming ones are too much
Depending where you are, the bright bulbs help spot deer. Though if you are in the suburbs that might not be really much of a problem
But they have to be able to see something 20km ahead!
Agreed. I can’t tell when people are driving with their high beams on anymore.
This is why I always have the high beans on when driving my 90’s car. I’ve got to fit in with the cool kids (oh and be able to see the road despite the blinding lights coming at me.)
Not sure if you are joking or not. But at times that’s actually what I think about and sometimes even do. If there is a car with too bright lights coming down the road I’ll turn on the high beams because it reduces my ability to see the road otherwise.
My pet peeve is not just the brightness, but the blueness. These things are fucking blue raspberry slurpee blue. Paired with a very reddish orange turn signal they come up behind me and indicate and I think I’m getting pulled over for a sec.
deleted by creator
Because they’re cheap and look “modern/futuristic” so shit manufacturers love them. I have also used electrical tape on power strips, chargers, smoke detectors, etc
That and your average electrical engineer will consider an LED useful that signals the device has power.
Most probably then don’t consider where the device is actually used. In a well-lit office space that LED doesn’t annoy anyone.
fun fact: human eyes can actually perceive single photons.
also fun fact: we can shoot single photons.
I have a lamp and that has an LED that is on all the time.
Why would a lamp have a permanently on LED? That’s what I get for getting cheap crap from China, rather than premium crap from China.
I prefer midrange crap from China
I don’t know if this is the right place to complain about this but since it’s LED related… Why are all the automakers putting the brightest fucking LED’s in their new vehicles now?? They are legit brighter then how high beams used to be only a few years back!!
What did we all used to do when headlights used to be slightly yellow??
Yeah, there used to be regulations on this stuff, because you kind of just end up in an arms race.
Pretty much the only reason you’d want brighter headlights, is so that if someone blinds you with their bright headlights, you still see things behind that.We’re also in a big vehicles arms race. I’m always telling people about how big vehicles cause more kids to get run over, more pedestrians to die, more damage in accidents, etc. The most common response from giant vehicle owners is that it makes them feel safer in an accident.
In 10 years they’ll probably all be driving tanks with stadium lights mounted on top.
It’s so “Big Brother” can still watch you…?! 😅
Bluetack is your friend. The constant red light on our baby monitor was too distracting in the pitch blackness of the night that it kept my kids awake. A small amount of Bluetack and this problem is solved. Not asthectically pleasing but a good option.
I design electronics sometimes. Generally, people want an indicator light on their product, since it’s a cheap way to show the state of a system.
The main problem is, the human eye adapts to darkness. You can still clearly see an LED in a dark room when a few microamperes pass through them, but then they are useless in brighter light in that case. There’s no specific amount of current that produces light that’s bright enough in a lit room, but isn’t too bright in a dark room.
I can fix that by occasionally turning off the LED and measuring voltage across it (LEDs detect light in addition to emitting it), then dimming it if I’m in a dark room. However, this is quite complicated to do and requires a capable microcontroller and a pretty ninja embedded systems programmer. Most product developers I know won’t think of specifically doing this.
Finally, I can save 0.1 cents (plus board space plus assembly complexity, which cost more) by connecting an LED directly to the pins of a microcontroller instead of using a resistor to limit current. Some microcontrollers specifically allow this, up to 10 or 20 milliamperes, which is enough to be too bright in some contexts already. Margins on hardware manufacture are extremely thin, so optimizing even 1 cent off a board is pretty important.
All of this together leads to a lot of LED proliferation, which I’ don’t like either. The stuff I build for myself often has a way to control the LED brightness, although this would be too expensive to add to a consumer product as a general rule. For small devices, there’s a tilt switch inside that turns off the indicator LEDs if you turn it upside down and hold it for a few seconds. That way you can just reach over at night and fix it without fiddling for switches or controls.
I have opened up devices to physically remove the led. SMD LEDs stand no chance against a steady hand and a precision flathead screwdriver.
precision flathead screwdriver
Ah yes. Just like my precision printer adjustment mallet.
I can understand for things that don’t look obviously on, but a fan? C’mon. If the fan starts spinning, I know it’s working. I don’t need a light telling me it’s on.
I don’t seem to find it mentioned: LEDs at night are terrible for your sleep, especially the blue ones. Among other things they suppress the melatonin release.
An article that goes into more detail and provides a citations for further research.
I miss the days of red LEDs. I understand blue were new and novel at one point but that’s passed.
new AND novel?
also fresh and different!
Our fresh state of the art new innovation, neoBlue© coloured LEDs, using novaBright technology(patent pending) to brighten your days and lead to a fresh and exciting future filled with the latest stunning luxuries.
Why has this become such a common thing? Is this really something most people want? To have a room that is never actually dark even with the lights turned off?
The gradual spread of light pollution has gotten crazy, and people still don’t really notice it. We’re at the point that it’s actually driving insects to extinction. If you look somewhere rural vs. urban the difference in what constitutes “night” is mindblowing, and rural areas are getting brighter all the time themselves.
I’m honestly a bit surprised that we don’t have mandatory dimmers installed in all major buildings that turn off the lights after X hour or x number of hours without any movement.
That, and motion sensors and dimmers on street lights with shades on them to prevent light from being blasted into people’s homes and apartments.
This much light pollution can’t be healthy.
I have a similar complaint about almost all “gamer gear” having RGB lighting. Why would I want that? I’m not even opposed to the “gamer” aesthetic of a lot of sharp lines and strong colors, I think that can look really good, but when my mousepad has RGB it’s time to blow the whistle and stop all manufacturing until we can figure out what’s going on.
Buying RAM recently and people are reviewing the fucking RGB instead of the performance. Like, WTF are you doing with your life? I managed to find some without gratuitous lighting effects thankfully.
