You’re about to take your first steps in the wonderful world of Linux, but you’re overwhelmed by the amount of choices? Welcome to this (I hope) very simple guide :)

The aim of this guide is to provide simple, clear information to ease your transition as a beginner. This is not a be-all-end-all guide nor an advanced guide.

Preamble

Make sure your hardware is compatible

Nowadays most relatively recent hardware works perfectly fine on Linux, but there are some edge cases still. If you don’t use niche hardware and your wifi card is supported, chances are you’re golden. Please note that nVidia is a bad faith player in the Linux world, so if you have a GeForce GPU, expect some trouble.

Make sure your favourite apps are either available or have a good replacement on Linux

If some proprietary app is essential to your workflow and is irreplaceable, consider running it in a VM, keeping a Windows partition for it or try and run it through Wine (this is advanced stuff though).

Be aware that Linux is not Windows/MacOS

Things work differently, and this is normal. You will probably struggle at the beginning while adjusting to a new paradigm. You may have to troubleshoot some things. You may break some things in the process. You will probably get frustrated at some point or another. It’s okay. You’re learning something new, and it can be hard to shed old habits forged by years on another system.

What are the best resources out there?

Arch Wiki without a doubt. Despite being heavily tied to Arch, most of its content is readily usable to troubleshoot most modern distros, as the building blocks (Kernel, systemd, core system apps, XOrg/Wayland, your DE of choice etc.) are the same.

Okay, now to the most important questions

Which distro should I use?

There are a metric fuckload (or 1.112 imperial fucktons) of distros out there, but these can be broadly put into two main categories: general-purpose distros and niche-distros. I advise you to keep it as mainstream as possible for your first steps. A distro with a large user base, backed by a large community of maintainers and aimed at being as fuss-free as possible is always better than a one-person effort tailored to a specific use-case.

Beginner distros

These are great distros for beginners as well as more advanced users who just want to have a system that needs almost no configuration out of the box, just works and stays out of the way.

  • Fedora Workstation: Clean, sensible, modern and very up to date and should work out of the box for most hardware. Despite the community’s rightful backlash against Red Hat, this is still a great distro for beginners and advanced users. Even Linus Torvalds himself favors Fedora as a daily driver. Fedora is the flagship distro for the Gnome Desktop Environment.
  • Linux Mint: While I haven’t used it myself, there is a lot of praise here for this Ubuntu derivative from beginners and advanced users alike. Its main goals are ease of use and being the flagship distro for the Cinnamon DE, which is very similar to Windows and may ease the transition for new users.
  • Pop!_OS: Backed by hardware Linux vendor System76, this Ubuntu derivative shares some of the issues with its infamous parent, but its heavily modified Gnome DE looks and feels nice.
  • I do not recommend Ubuntu nor Manjaro: despite being marketed as “beginner friendly distros”, and despite often running perfectly fine, these two have major issues in management, packaging policies or philosophy that might make your life as a beginner difficult. Ubuntu suffers from it’s parent company’s goal to make Ubuntu kinda-Linux-but-not-really, and there are some great derivatives like the ones cited above that work equally well but revert some of the most controversial decisions made by Canonical. Manjaro might seem appealing as a “beginner-friendly” Arch derivative and some of its tools are fantastic to remove some configuration burden, but ongoing mismanagement issues and the fact that it needs regular maintenance as updates often break stuff prevent it from being a truly beginner distro.

Advanced distros

So you’ve taken your first steps, you’re starting to be really comfortable with Linux, and you want to get your hands dirty and really learn what’s happening under the surface? These should not be installed as your first distro, unless you like extremely steep learning curves and being overwhelmed.

  • Debian: as one of the oldest, still maintained distros and the granddaddy of probably half of the distros out there, Debian is built like a tank. A very stringent policy of focusing on bug and security fixes over new features makes Debian extremely stable and predictable, but it can also feel a bit outdated. Still a rock-solid experience, with a lot to tinker with despite very sensible defaults. It is an incredible learning tool and is as “Standard Linux” as can be.
  • Arch: The opposite of Debian in philosophy, packages often come to Arch almost as soon as the source code is released. Expect a lot of manual installation and configuration, daily updates, and regularly fixing stuff. An incredible learning tool too, that will make you intimate with the inner workings of Linux.

Which Desktop Environment should I use?

This is entirely up to you, and depends on your preferences.

  • Gnome: Full featured yet very minimalist, Gnome is a great DE that eschews the traditional Desktop metaphor. Like MacOS, out of the box, it provides the strongly opinionated developers’ vision of a user experience. Fortunately, unlike MacOS, there are thousands of extensions to tweak and extend the looks and behaviour of the DE. Dash-to-dock or Dash-to-panel are great if you want a more MacOS-like or Windows-like experience, Blur My Shell is great if you love blurry transparent things, Appindicator is a must, and everything else is up to you. Gnome’s development cycle is highly regular and all core components and apps follow the same release schedule, which explains why a lot of distros choose it as their default DE.
  • KDE Plasma: Full featured and maximalist, Plasma does not cater to a single design philosophy, is very flexible and can be tweaked almost ad infinitum. This may be an advantage for people who like to spend hours making the perfect environment, or a disadvantage as the possibilities can be overwhelming, and the added complexity may compromise stability, bugginess or completeness. There is no single development cycle for core components and apps, which makes it a bit more difficult for distro maintainers.
  • Cinnamon: If you want the most “windows-like” experience out of the box, Cinnamon is great. As I have no experience with it, I’ll let the Mint users praise it in the comments :D
  • Lightweight DEs for old or underpowered machines: The likes of XFCE, LXDE, LXQt are great if you want to ressurect an old machine, but lack the bells and whistles of the aforementioned DEs.

Philosophical questions, or “I heard conflicting stuff over the Internet and now I’m scared”

You’ve done your research, you’re almost ready to take the plunge, you even read a lot of stuff on this very community, but people seem very passionately for or against stuff. What should you do?

Shoud I learn the command line?

Yes, eventually. To be honest, nowadays a lot of things can be configured on the fly graphically, through your DE’s settings. But sometimes, it’s much more efficient to work on the command line, and sometimes it’s the only way to fix something. It’s not that difficult, and you can be reasonably productive by understanding just about a dozen very simple commands.

I have a very old laptop/desktop, should I use a distro from this era?

Noooo!. Contrary to Windows and MacOS which only work correctly on period-correct computers, Linux runs perfectly well on any hardware from the last 20 to 30 years. You will not gain performance by using an old distro, but you will gain hundreds of critical security flaws that have been since corrected. If you need to squeeze performance out of an old computer, use a lightweight graphical environment or repurpose it as a headless home server.

Should I be concerned about systemd?

No. In short, systemd is fine and all major distros have switched to systemd years ago. Even the extremely cautious people behind Debian have used systemd as default since 2015. Not wanting to use systemd is a niche more rooted in philosophical rather than practical or technical reasons, and leads to much deeper issues than you should concern yourself with as a beginner. (Thanks @GravitySpoiled@lemmy.ml for the precisions)

Should I be concerned about XOrg/Wayland?

Yes and No, but mostly No. First off, most distros install both Wayland and XOrg by default, so if one is not satisfying to you, try the other. Remember in the preamble when I said nVidia was a bad actor? Well, most of people’s complaints about Wayland are because of nVidia and their shitty drivers, so GeForce users should stay on XOrg for now. But like it or not, XOrg is dead and unmaintained, and Wayland is the present and future. XOrg did too many things, carried too many features from the 80’s and 90’s and its codebase is a barely maintainable mess. Wayland solves that by being just a simple display protocol with a much smaller codebase, and offloading feature development to the compositors.

Should I look for a gaming-focused distro?

No. General purpose distros are perfectly fine for gaming. You can install Steam, Lutris, Heroic, Itch etc. and use Proton just fine on almost anything. Even Debian. In short, yes, you can game on Linux, there are great tutorials on the internet.

Should I be concerned about Flatpaks and/or Snaps?

Not really. Flatpaks are great, and more and more developers package their apps directly in Flatpak format. As a rule of thumb, for user facing applications, if your app store gives you the choice between Flatpak and your native package manager version, choose the most recent version. Snaps however are a Canonical/Ubuntu thing, so as long as you avoid Ubuntu, its spins and its derivatives that still include Snaps, you should be fine. They tend to take a lot longer to startup than regular apps or Flatpaks, the snap store is proprietary, centralized and Canonical controls every part of it. If you’re fine with that, have fun. (Thanks @GravitySpoiled@lemmy.ml for the precisions)

Should I follow The Way?

Yes. One does not speak unless one knows. You can take your helmet off in public tho.

Feel free to help correct, expand, or simplify this guide :)

  • Black616Angel@feddit.de
    link
    fedilink
    arrow-up
    8
    ·
    1 year ago

    Sorry, but this guide is all over the place.

    You mention Arch before other distros and never even explain what a distros is (e.g. ‘a flavor of Linux with a choice of preinstalled software’).

    Then you say that it’s a beginners and not an advanced tutorial, but mention advanced distros.

    Also your reasons for the beginner distros are not well written:

    1. Fedora mentions “rightful backlash against the company”
    2. Linux Mint “I haven’t used”
    3. Pop OS “shares some issues”

    Why take one of them? They all sound difficult or weird. (to a newby reader)

    Then the part about Ubuntu and Manjaro which is longer than the 3 distros you recommend. This has major “Linux fanboy bashing other Linux fanboys” vibes.

    The rest I really liked, maybe replace “this era” with “its era”.

  • corsicanguppy@lemmy.ca
    link
    fedilink
    arrow-up
    4
    ·
    1 year ago

    I love how this expansive, barely-biased summary - which is WAY above-bar, to be clear - is followed up by everyone’s “this is my favourite distro and you should run it too” even if it’s completely badly-matched.

  • Captain Aggravated@sh.itjust.works
    link
    fedilink
    arrow-up
    3
    ·
    1 year ago

    Mint Cinnamon user praising it in the comments, on the case!

    I switched to Linux in the earlier days of Windows 8.1. Mint was the second distro I tried out after Ubuntu Unity, and it’s still my daily driver ten years later. Cinnamon felt more familiar to me An XP-Vista-7 veteran, than Win 8.1 and 10. Mint feels like someone sat down and designed the whole thing, rather than slapping layer after layer of new crap on top of the same code from the late 90’s.

    Out of the box Mint is very usable, the customization I do to it is stuff like change the wallpaper and default color scheme.

    The Cinnamon team just gets me. They make software for people like me.

  • Nougat@kbin.social
    link
    fedilink
    arrow-up
    3
    ·
    1 year ago

    Request for clarifications “for beginners”:

    systemd, XOrg, Wayland - you have mentioned those without an explanation of what they are.

    Last time I did anything with linux, Ubuntu was all the rage. I’m interested in hearing more details about what makes it a distro to avoid.

    @snaptastic, please let me know if this comment is relevant enough.

    • WFH@lemm.eeOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      I’ve updated my post with “I heard conflicting stuff over the Internet and now I’m scared” and an introduction. Those are legitimate questions for people who, like me, do a lot of research before committing to something. Some of the discussions here and in other communities might scare people off, as they might feel they’ve done the “wrong” choice or are afraid to do the “wrong” choice.

  • BOMBS@lemmy.world
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 year ago

    I use KDE Neon, but highly recommend Linux Mint for new users. I’m not in the computer industry, yet I have tried a lot of distros over the past ~15 years. Out of all of them, Linux Mint had the easiest setup by far. The drivers worked without difficulty, the installation was intuitive, the Timeshift app helped me undo any problems I created while tweaking the system, and https://forums.linuxmint.com/ is quite helpful. Compare this with KDE Neon, that had me using a second computer for hours to figure out how to get my specific wifi card drivers working. Now that I have had enough time to learn about Linux and troubleshooting, I prefer KDE Neon for the desktop environment, but Linux Mint really is so easy. Again, I highly recommend it.

    Thanks for the write up, OP!

  • throwaway2@lemmy.today
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    Make sure your hardware is compatible

    Perhaps it’s important to point towards resources where new users can check compatibility; like e.g. linux-hardware.org. Or even better ones that I’m unaware of.

  • Avid Amoeba@lemmy.ca
    link
    fedilink
    arrow-up
    1
    ·
    edit-2
    1 year ago

    Any beginner guide that advises against Ubuntu does disservice to beginners. It’s doing the opposite of helping beginners get into Linux. Ubuntu is still the easiest on-ramp to Linux today by far, despite anyone’s feelings about Canonical. Avoiding it harms Linux adoption.

  • 🍜 (she/her)@lemmy.ml
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    What about Zorin OS? I find it really simple to use, plus it has a built in wine thing for running non-linux files.

  • ParsnipWitch@feddit.de
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    This is a great resource and post! I feel bad for commenting already but I can’t help it.

    OpenSuse is missing and, this is of course personal opinion, but I think Debian is a great distro for beginners.

    Also OpenSuse can be great for beginners. Though not as much as Debian.

  • wabafee@lemm.ee
    link
    fedilink
    arrow-up
    1
    ·
    edit-2
    1 year ago

    I don’t get the hate for Ubuntu, it just works. For those who don’t care what setup in their system. Especially those who are coming from Windows or MacOS its a good stepping stone.

  • glennglog22@kbin.social
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    This is pretty useful information as someone that has used Linux off and on (still essentially a beginner). I’d like a bit more elaboration on why it is that Snaps is bad though, as I’m currently using Kubuntu and I haven’t found anything seemingly wrong with it on my end.

  • cerement@slrpnk.net
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    would recommend linking the phrase “a fuckload of distros” to DistroWatch – give newcomers a heads-up on just how deep that particular rabbit hole goes …

  • Tyler K. Nothing@startrek.website
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    On the matter of Ubuntu I think the issues with the OS need to be clarified. From the positive perspective, it is easy to use and just works. From the negative side, it’s become more and more bespoke over time. The Snaps being proprietary and a lot of work in the terminal to activate functions enjoyed out-of-the-box by almost all other distros is very unfriendly. And, I would suggest there are numerous other distros that “just work” but without Ubuntu’s baggage. Mint, Pop_OS!, and Fedora are all easy to install, setup, and use. Even KDE’s Neon is dirt simple to install and use and offers a great KDE experience, if you like that.

    That said, however, I believe that Mint is the best distro for new users, though Fedora and Pop are close behind.

    • WFH@lemm.eeOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Thanks for this great writeup about what makes Ubuntu its own thing rather than standard.

    • theshatterstone54@feddit.uk
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      I find it to be quite inaccurate depending on who you are. As a beginner, it’s fine, but for me, for example, the distro I’m looking for is Arch-meets-NixOS. All the packages I need, with the packages being easy to install, avoiding compiling wherever possible, NOT immutable, and having a Stable release, with a 6-month release cycle.