I’m currently trying to set up a homebrew cassette tape storage format, but trying to use existing tech where possible. I was excited to see that minimodem already exists for converting an audio stream to a byte stream, and is even available in termux for android, so I could decode cassettes with my phone! However, I’d like some sort of higher-level tool to encode and decode “packets” or “slices” so that I can add error correction. I’m sure this sort of thing must exist for amature radio purposes.
I could write a script that cuts a file into slices, with checksums and redundancy for each slice, and then pads them with null bytes so I can isolate each frame when decoding. What I want is to find out if that’s already been done. I’ve heard of AX.25 packets but I can’t find a tool that does that with stdio.
I tried that first! But
tarcomplains if it can’t find the file header! So I still need to do some sort of packets. Unless you know some sort of workaround?You’re probably decoding noise or in the middle of the bit stream.
What you’re looking for is called “preamble.” That’s a sequence of bits used to synchronize the decoder (marks the start of data, useful in modulation schemes for clock recovery, and a few other things).
Looking at minimodem’s manual, try using the sync-byte option. Prepend your tar stream with a string of bytes, like 0x01, before sending to minimodem for encoding. Then use the sync code option to mark the start of the tar bit stream. This is as simple as cat preamble.bin myfiles.tar | minimodem --tx …
Other things to consider: start small with 300 baud BFSK before speeding up. Test with wav files before attempting physical tape or speakers and a microphone.