Hello!

So I decided, as a way to improve my cad skills, that I would take an old laptop of mine and design a case around the motherboard and use it as a micro PC in my work area. I have nearly all of it designed, just shy of the power button.

On account of not having a sautering iron, I would rather avoid sautering a button on and was trying to go a more analogue approach by printing a button into the case that could maybe use a compliant mechanism to press in and come back out, but I am very uncertain how to go about it.

Any help appreciated

  • EmilieEvans@lemmy.ml
    link
    fedilink
    English
    arrow-up
    2
    ·
    5 months ago

    The issue with Weller is their price in a competitive market.

    Considering no alternative the entry level Weller is fine. Ersa has their awesome itool with this really short distance between soldering iron tipp and finger grip: https://ts.kurtzersa.com/electronics-production-equipment/soldering-tools-accessories/soldering-desoldering-stations/produkt-details/i-con-pico-1.html

    Performance: Weller and Ersa are more or less equal. For generic solder joints both are great. If there are high thermal mass and it isn’t possible to use a large tipp than the Hakko T12 is the superior technology. Changing tips on the Ersa (while not recommended by the manufacturer) can be done with the iron heated up and tool free within 5 seconds.

    Ergonomics: 100% Ersa. The only reason it has been my daily driver for half a decade and is here to stay. Before this station I actually had a Weller.

    JBC has a similar tool handle to the Ersa but those are very expensive with little benefit.

    The price to performance king are genuine Hakko T12 tipps with a China station.

    • morbidcactus@lemmy.ca
      link
      fedilink
      English
      arrow-up
      1
      ·
      5 months ago

      Oh for sure, totally appreciate that Weller is pricey, and I’d totally expect good tips on a knockoff to perform well. For me it’s going to come down to preference, wish I could try a bunch of different irons before buying, I at least had experience with wellers so I knew that I found them comfortable to work with and I’m not doing a ton of surface mount or fine stuff so meets my needs.