I figured I’d post a blaster pic…
Anyway, I’m really struck by how good this Longshot is for the price. Handling makes the thing fun to use despite only averaging about 135fps.
I did the barrel swap mainly so that I could add the BCAR. I don’t see the internals holding up to a stronger spring without swapping them for metal. Once you’ve done that then you’ve got the shell to worry about. The blaster feels surprisingly solid but the shell is really thin.
You must log in or # to comment.
Which barrel are you using? And I assume that’s a Jingjia CNC bcar?
The BCAR barrel is from MEGO. It’s only got a 5 degree twist so not as effective above 200fps.
The barrel is from Black Raisins. I’m pretty sure that I’m getting a better seal than stock because the OD is a tiny bit larger. However, it has a textured finish which is probably not ideal given that the plunger wraps around it.
Almost picked it up this week, but figured I’d wait for a sale. I’ve got too many blasters anyways.
I worry about internal strength, I’ve already seen someone have a cracked PT after it being released like what, a week ago? I wonder if it can take a PT from a Lynx or a Talon Claw or something
There are replacement metal plunger tubes up for sale already. I’m considering getting one once I get a second lonxshot to mod.
I get 160FPS out of mine out of the box with the short darts it came with.
I used Worker darts in mine. Performance is pretty inconsistent. I got shots as high as 169fps and as low as 114fps.
I only have Worker gen 2’s, but the dart zone pro darts average about 140 with the SCAR on (127 to 146 over 8 rounds) but with the SCAR removed it hits 160 pretty consistent.
I’d recommend swapping to a talon or Koda mag tho, the stock one is a bit tricksy
Have you tried using a koda mag with the included adapter? For some reason my koda doesn’t want to stay in.
I only have talons and tachis, so i have not tested Kodas, i believe it’s supposed to take them though?
I haven’t, I only have straight talon 15’s and tachis, both work fine tho.
Yeah, my straight 15s and tachi both work fine. It’s only the koda I’m having trouble with. Could be as simple a fix as filing the retention notch on the mag, but I’m nervous to try it.
I just picked mine up the other day, kinda excited to start messing with it. Did you open yours completely or just take off the front end?
I opened it completely. I had to dremel the front end to fit the barrel. There are a lot of screws and a few fiddly bits but it’s not bad at all to get apart.
I also tried removing the ratchet arm. It works, but I noticed that with it missing the trigger pulls the front prime back just enough that the blaster won’t fire. Not a big deal if you push on the front grip, but still a nuisance.
Which mag adapter is that? Is it just a spring detent so you can pull it out without holding a lever?
