I recently purchased a Dell PowerEdge R730 at a killer price, and intend it to be the cornerstone of my home lab. I plan to use it as both a NAS and a container server so I can set up whatever I want with it. I’m a bit unsure of what a good setup here looks like, so I’m hoping for a bit of guidance.

As my R730 has 16 drive bays, I intend for 10 of those to be high capacity HDDs for the NAS with the remaining spots for SSDs for the containers. The R730 will also have a PERC H730 RAID controller. I want a full featured NAS solution (although I am open to more lightweight solutions) so my go to thought is TrueNAS. My plan was to install Proxmox and run TrueNAS on top of it, but I am unsure if this is the best method. Does anyone have any insight on how well this works or if there’s a cleaner solution?

Addendum: Anyone have any recommendations for RAID setups? I currently have 4x900 GB 10k SAS Dell Enterprise drives but I intend to bump that up to 10x900 GB over time. I’d like to be able to add these without much hassle, but I’m unsure what to go with. It seems that ZFS can handle it well alone, but I don’t want to have gotten the good raid controller for nothing so I’m wondering if using ZFS with the RAID controller in HBA mode will be more worth it than a dedicated RAID setup. And if I’m using a RAID setup, should I go RAID or unRAID? If I go RAID, is RAID 01, 10, or 60 a better option here? Based on my research, it sounds like I’ll need a lot more drives for a proper RAID setup and it’ll be less flexible, but I would like some second opinions.

  • pztrn@bin.pztrn.name
    link
    fedilink
    English
    arrow-up
    2
    ·
    9 months ago

    Using ZFS on Proxmox for couple of years under different workloads (home servers, productions at job), it is very good.

    Just tune it as you need :)

    • The Stoned Hacker@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      9 months ago

      Thanks a ton! I’m on the proxmox forums trying to figure out if I should stick with the H330 that came with the server and return/sell the H730 I got, or if I should use the H730. Seems there’s a recent thread where they’re figuring it out so I’ll get to the bottom of it.

      • twilightwolf90@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        8 months ago

        Imo get the H730 if it’s financially reasonable. The passthrough is better supported in my experience. You can resell the H330 fairly easily.

        • The Stoned Hacker@lemmy.worldOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          8 months ago

          Turns out they put the H730 in the server already so I never got an H330. I want to test the SMART data but it looks like the newer firmware should be fine.